Printer-friendly versionProsafe Hydraulic mechanism enclosed within an anti-vandal casing
PRODUCT RANGE
Key
 |
Access for Pedestrians |
 |
Access for Pedestrians with dogs |
 |
Access for horseriders |
 |
Access for mobility vehicles by use of RADAR key |
 |
Access for large mobility vehicles for disabled ramblers and large 3-wheeled pushchairs |
 |
Access for medium mobility for vehicles wheelchairs and pushchairs |
 |
Complies with specifications in BS5709:2006 for Gaps, Gates and Stiles |
REQUEST A BROCHURE
Product Range
Parkland Kissing Gate
Description:
A kissing gate option is now available to match our estate fencing. Utilising the self closing Parkland gate, it is available with either a 1000mm gate leaf and 1200mm diameter hoops to suit ramblers and also a 1200mm wide gate along with 1800mm hoops for users of mobility vehicles if required.
Worcester Bridle Gate 2 WAY
Description:
Taking the highly successful Chiltern gate and introducing the tried and tested Prosafe Self Closing mechanism, the ground breaking 'Worcester' design has the major additional benefits of a wider scope of closing speeds to suit all local conditions. In addition the latching process is much quieter as a result of the hydraulic action.
Dimensions:
Height 1.2m , with post to post 1.9m, gate 1.5m.
Comment:
Available as either one way or two way closing options, the Worcester is very easy to instll and set up. Can also be supplied as a pedestrian (1200mm )gate leaf only with anti-vandal fittings
COUNTY MESH SYSTEM
Description:
The County Mesh System is available ex stock and offers security whilst remaining unobtrusive especially in rural environments.
Dimensions:
Available in either a 2000mm or 2400mm high.
60 x 60 SHS Posts are set at 3000mm nominal post centres and mesh is attached to
panels by heavy-duty tamper proof clamps c/w recessed bolt head.
Comment:
CATTLE GRIDS
Cattle grids are becoming an increasingly popular solution to
containing livestock movement in areas where gates are otherwise not
required. We are able to offer grids ranging in capacity from 10-40
tonne capacity.
Sizes available:
10 tonne
20 tonne
Commercial:
40 tonne
Important Notice: The capacities above rely on support walls in the correct
positions.
Sizes available
TIMBER GATES WITH HEAVY DUTY LOWER RAILS
 |
HEAVY DUTY VEHICLE BARRIER – RECTANGULAR Description: Manufactured from 100mm x 50mm RHS, and hot dipped galvanised after manufacture. The PADLOCK SECURITY BOX system is incorporated into the slam post thus allowing the barrier to be used left or right handed. Sizes available 12,14,16 foot. Posts are extra. HORSE FRIENDLY VEHICLE BARRIER Description: Galvanised tubular steel barrier with timber cladding rails. Hanging Stile 50mm x 50mm Box Section. Slam Stile 50mm x 50mm Box Section. Dimensions: Width as required, with a minimum of 10` (3m). Maximum installed height at centre should be 25cm. The size of the central gap is 1.2m width at the bottom and 2.0m at the top. Comment: The timber cladding rails have been incorporated in the design to dampen the noise of contact with hooves. This design is not suitable over hard surfaces, e.g. concrete or tarmac. For added security the PADLOCK SECURITY BOX is also available by installing a PADLOCK SECURITY BOX post.
Options included for both the lockable sliding bolt and the padlock security BRISTOL TWO-IN-ONE GATE
Description:
Galvanised tubular steel field gate with integral self closing pedestrian step through gate and auto latch. Dimensions: Field Gate installed height 1.2m. Width as required. Integral step through gate. Height 0.95m. Width 0.7m. Step over Height 0.2m. | |
The Parkland was developed for areaa where a more ornate solution was required.